File Manager
Viewing File: git.rb
#
# Author:: Daniel DeLeo (<dan@kallistec.com>)
# Copyright:: Copyright 2008-2016, Chef Software Inc.
# License:: Apache License, Version 2.0
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
require "chef/exceptions"
require "chef/log"
require "chef/provider"
require "fileutils"
class Chef
class Provider
class Git < Chef::Provider
extend Forwardable
provides :git
def_delegator :new_resource, :destination, :cwd
def whyrun_supported?
true
end
def load_current_resource
@resolved_reference = nil
@current_resource = Chef::Resource::Git.new(new_resource.name)
if current_revision = find_current_revision
current_resource.revision current_revision
end
end
def define_resource_requirements
# Parent directory of the target must exist.
requirements.assert(:checkout, :sync) do |a|
dirname = ::File.dirname(cwd)
a.assertion { ::File.directory?(dirname) }
a.whyrun("Directory #{dirname} does not exist, this run will fail unless it has been previously created. Assuming it would have been created.")
a.failure_message(Chef::Exceptions::MissingParentDirectory,
"Cannot clone #{new_resource} to #{cwd}, the enclosing directory #{dirname} does not exist")
end
requirements.assert(:all_actions) do |a|
a.assertion { !(new_resource.revision =~ /^origin\//) }
a.failure_message Chef::Exceptions::InvalidRemoteGitReference,
"Deploying remote branches is not supported. " +
"Specify the remote branch as a local branch for " +
"the git repository you're deploying from " +
"(ie: '#{new_resource.revision.gsub('origin/', '')}' rather than '#{new_resource.revision}')."
end
requirements.assert(:all_actions) do |a|
# this can't be recovered from in why-run mode, because nothing that
# we do in the course of a run is likely to create a valid target_revision
# if we can't resolve it up front.
a.assertion { !target_revision.nil? }
a.failure_message Chef::Exceptions::UnresolvableGitReference,
"Unable to parse SHA reference for '#{new_resource.revision}' in repository '#{new_resource.repository}'. " +
"Verify your (case-sensitive) repository URL and revision.\n" +
"`git ls-remote '#{new_resource.repository}' '#{rev_search_pattern}'` output: #{@resolved_reference}"
end
end
def action_checkout
if target_dir_non_existent_or_empty?
clone
if new_resource.enable_checkout
checkout
end
enable_submodules
add_remotes
else
Chef::Log.debug "#{new_resource} checkout destination #{cwd} already exists or is a non-empty directory"
end
end
def action_export
action_checkout
converge_by("complete the export by removing #{cwd}.git after checkout") do
FileUtils.rm_rf(::File.join(cwd, ".git"))
end
end
def action_sync
if existing_git_clone?
Chef::Log.debug "#{new_resource} current revision: #{current_resource.revision} target revision: #{target_revision}"
unless current_revision_matches_target_revision?
fetch_updates
enable_submodules
Chef::Log.info "#{new_resource} updated to revision #{target_revision}"
end
add_remotes
else
action_checkout
end
end
def git_minor_version
@git_minor_version ||= Gem::Version.new( git("--version").stdout.split.last )
end
def existing_git_clone?
::File.exist?(::File.join(cwd, ".git"))
end
def target_dir_non_existent_or_empty?
!::File.exist?(cwd) || Dir.entries(cwd).sort == [".", ".."]
end
def find_current_revision
Chef::Log.debug("#{new_resource} finding current git revision")
if ::File.exist?(::File.join(cwd, ".git"))
# 128 is returned when we're not in a git repo. this is fine
result = git("rev-parse", "HEAD", cwd: cwd, returns: [0, 128]).stdout.strip
end
sha_hash?(result) ? result : nil
end
def add_remotes
if new_resource.additional_remotes.length > 0
new_resource.additional_remotes.each_pair do |remote_name, remote_url|
converge_by("add remote #{remote_name} from #{remote_url}") do
Chef::Log.info "#{new_resource} adding git remote #{remote_name} = #{remote_url}"
setup_remote_tracking_branches(remote_name, remote_url)
end
end
end
end
def clone
converge_by("clone from #{new_resource.repository} into #{cwd}") do
remote = new_resource.remote
clone_cmd = ["clone"]
clone_cmd << "-o #{remote}" unless remote == "origin"
clone_cmd << "--depth #{new_resource.depth}" if new_resource.depth
clone_cmd << "--no-single-branch" if new_resource.depth && git_minor_version >= Gem::Version.new("1.7.10")
clone_cmd << "\"#{new_resource.repository}\""
clone_cmd << "\"#{cwd}\""
Chef::Log.info "#{new_resource} cloning repo #{new_resource.repository} to #{cwd}"
git clone_cmd
end
end
def checkout
sha_ref = target_revision
converge_by("checkout ref #{sha_ref} branch #{new_resource.revision}") do
# checkout into a local branch rather than a detached HEAD
git("branch", "-f", new_resource.checkout_branch, sha_ref, cwd: cwd)
git("checkout", new_resource.checkout_branch, cwd: cwd)
Chef::Log.info "#{new_resource} checked out branch: #{new_resource.revision} onto: #{new_resource.checkout_branch} reference: #{sha_ref}"
end
end
def enable_submodules
if new_resource.enable_submodules
converge_by("enable git submodules for #{new_resource}") do
Chef::Log.info "#{new_resource} synchronizing git submodules"
git("submodule", "sync", cwd: cwd)
Chef::Log.info "#{new_resource} enabling git submodules"
# the --recursive flag means we require git 1.6.5+ now, see CHEF-1827
git("submodule", "update", "--init", "--recursive", cwd: cwd)
end
end
end
def fetch_updates
setup_remote_tracking_branches(new_resource.remote, new_resource.repository)
converge_by("fetch updates for #{new_resource.remote}") do
# since we're in a local branch already, just reset to specified revision rather than merge
Chef::Log.debug "Fetching updates from #{new_resource.remote} and resetting to revision #{target_revision}"
git("fetch", new_resource.remote, cwd: cwd)
git("fetch", new_resource.remote, "--tags", cwd: cwd)
git("reset", "--hard", target_revision, cwd: cwd)
end
end
def setup_remote_tracking_branches(remote_name, remote_url)
converge_by("set up remote tracking branches for #{remote_url} at #{remote_name}") do
Chef::Log.debug "#{new_resource} configuring remote tracking branches for repository #{remote_url} " + "at remote #{remote_name}"
check_remote_command = ["config", "--get", "remote.#{remote_name}.url"]
remote_status = git(check_remote_command, cwd: cwd, returns: [0, 1, 2])
case remote_status.exitstatus
when 0, 2
# * Status 0 means that we already have a remote with this name, so we should update the url
# if it doesn't match the url we want.
# * Status 2 means that we have multiple urls assigned to the same remote (not a good idea)
# which we can fix by replacing them all with our target url (hence the --replace-all option)
if multiple_remotes?(remote_status) || !remote_matches?(remote_url, remote_status)
git("config", "--replace-all", "remote.#{remote_name}.url", remote_url, cwd: cwd)
end
when 1
git("remote", "add", remote_name, remote_url, cwd: cwd)
end
end
end
def multiple_remotes?(check_remote_command_result)
check_remote_command_result.exitstatus == 2
end
def remote_matches?(remote_url, check_remote_command_result)
check_remote_command_result.stdout.strip.eql?(remote_url)
end
def current_revision_matches_target_revision?
(!current_resource.revision.nil?) && (target_revision.strip.to_i(16) == current_resource.revision.strip.to_i(16))
end
def target_revision
@target_revision ||= begin
if sha_hash?(new_resource.revision)
@target_revision = new_resource.revision
else
@target_revision = remote_resolve_reference
end
end
end
alias :revision_slug :target_revision
def remote_resolve_reference
Chef::Log.debug("#{new_resource} resolving remote reference")
# The sha pointed to by an annotated tag is identified by the
# '^{}' suffix appended to the tag. In order to resolve
# annotated tags, we have to search for "revision*" and
# post-process. Special handling for 'HEAD' to ignore a tag
# named 'HEAD'.
@resolved_reference = git_ls_remote(rev_search_pattern)
refs = @resolved_reference.split("\n").map { |line| line.split("\t") }
# First try for ^{} indicating the commit pointed to by an
# annotated tag.
# It is possible for a user to create a tag named 'HEAD'.
# Using such a degenerate annotated tag would be very
# confusing. We avoid the issue by disallowing the use of
# annotated tags named 'HEAD'.
if rev_search_pattern != "HEAD"
found = find_revision(refs, new_resource.revision, "^{}")
else
found = refs_search(refs, "HEAD")
end
found = find_revision(refs, new_resource.revision) if found.empty?
found.size == 1 ? found.first[0] : nil
end
def find_revision(refs, revision, suffix = "")
found = refs_search(refs, rev_match_pattern("refs/tags/", revision) + suffix)
found = refs_search(refs, rev_match_pattern("refs/heads/", revision) + suffix) if found.empty?
found = refs_search(refs, revision + suffix) if found.empty?
found
end
def rev_match_pattern(prefix, revision)
if revision.start_with?(prefix)
revision
else
prefix + revision
end
end
def rev_search_pattern
if ["", "HEAD"].include? new_resource.revision
"HEAD"
else
new_resource.revision + "*"
end
end
def git_ls_remote(rev_pattern)
git("ls-remote", "\"#{new_resource.repository}\"", "\"#{rev_pattern}\"").stdout
end
def refs_search(refs, pattern)
refs.find_all { |m| m[1] == pattern }
end
private
def run_options(run_opts = {})
env = {}
if new_resource.user
run_opts[:user] = new_resource.user
# Certain versions of `git` misbehave if git configuration is
# inaccessible in $HOME. We need to ensure $HOME matches the
# user who is executing `git` not the user running Chef.
env["HOME"] = begin
require "etc"
case new_resource.user
when Integer
Etc.getpwuid(new_resource.user).dir
else
Etc.getpwnam(new_resource.user.to_s).dir
end
rescue ArgumentError # user not found
raise Chef::Exceptions::User, "Could not determine HOME for specified user '#{new_resource.user}' for resource '#{new_resource.name}'"
end
end
run_opts[:group] = new_resource.group if new_resource.group
env["GIT_SSH"] = new_resource.ssh_wrapper if new_resource.ssh_wrapper
run_opts[:log_tag] = new_resource.to_s
run_opts[:timeout] = new_resource.timeout if new_resource.timeout
env.merge!(new_resource.environment) if new_resource.environment
run_opts[:environment] = env unless env.empty?
run_opts
end
def git(*args, **run_opts)
git_command = ["git", args].compact.join(" ")
Chef::Log.debug "running #{git_command}"
shell_out!(git_command, run_options(run_opts))
end
def sha_hash?(string)
string =~ /^[0-9a-f]{40}$/
end
end
end
end